Services:

Residential Sealcoating

Our primary service for residential customers is sealcoating. Sealcoating is a preventive maintenance. We recommend sealcoating every 1-2 years, however, some customers prefer every year because they love how it looks and they know the asphalt will last as long as possible.

What truly sets us apart from other sealcoating companies is our premium mix and application process. We apply the sealer with a brush application, which takes much longer, however, the sealer goes on thicker and neater and will last longer. Spray is used in some cases with 2 coats applied.

Following are the steps taken during sealcoating process:

1. The entire surface is cleaned with wire brushes and blowers, removing all dirt and debris.

2. All oil, gas and grease spots are treated to ensure proper adhesion of sealer and to also remove the asphalt of harmful damaging chemicals.

3. All cracks are filled with a rubberized crack sealer to prevent water penetration into the foundation of the driveway or parking lot.

4. We apply a coal tar emulsion sealer, which meets all Federal Government specifications R-P-355E. We mix 3-4 pounds of sand per gallon to provide an anti-skid surface. We also add a latex additive to provide the sealant with greater flexibility, which provides greater wear.

5. Proper barricading of newly surfaced areas is provided and the proper curing time (24 to 48 hours) prior to being opened to traffic.

Crack Filling

 Any cracks that have a width of 1/8 of an inch or more will be filled prior to sealing.  After cracks have developed they are a yearly maintenance. The asphalt continues to  expand and contract with the weather.

 If cracks are not continually maintained, water will penetrate the asphalt foundation  and the crack will widen, deepen, and eventually become a pothole.

Asphalt Repair and Additions

Potholes, alligatored areas (multiple cracks in a defined area), and low spots can be fixed. Some of our customers need additional parking or an extension added so that cars don't drive off the edges.

Each asphalt job is different and needs to be addressed as such. The Sealer Guy will guide you to the most effective and cost efficient method for your specific needs.

Traffic Paint Application
The Sealer Guy apply all Traffic Paints at manufacturer recommended application rates (15 mil wet) using Graco Brand Airless Sprayers. Acrylic Paint should be applied at temperatures above 50 Degrees F and below 85% relative humidity. Alkyd Paints should be applied at temperatures above 40 Degrees F and below 85% relative humidity.

Other Services:

Power Washing - Commercial and Residential properties
Deck Restoration
Snow Plowing
Debris Removal

All work is done by the owner. This ensures careful and meticulous work with attention to detail and protection of your surrounding property.